Reliability Centered Maintenance (RCM)

Increasing Safety & Reliability in Gas Pipeline System

Tanggal
5-7 Maret 2012
2-4 Juli 2012
22-24 Oktober 2012

Jam Pelaksanaan
09.00 – 16.00 WIB

Tempat
Hotel Golden Flower, Bandung

Pembicara / Fasilitator
Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

Harga

1. Rp 5.750.000/person (full fare) or
2. Rp 5.500.000/person (early bird, payment 1 week before training) or
3. Rp 5.250.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA :

1. Modul Training
2. Flash Disk berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Tas
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

INTRODUCTION :
This course teaches the fundamentals of Reliability-Centered Maintenance (RCM). The course gives the participant fundamental tools and knowledge required to participate in any RCM analysis process especially in gas pipeline industry. Participant will have a good practice to developing and implemeted RCM .

WHO SHOULD ATTEND THIS TRAINING?
Maintenance managers, maintenance supervisors, reliability and maintenance engineers, maintenance technicians, production managers, production supervisors, operators, plant engineers, and anyone who is involved in operating and maintaining of assets.

TRAINING OBJECTIVE :
After the course participant will have a good understanding of :

1. Fundamental Reliability Centered Maintenance (RCM) philosophies
2. How to evaluate failure consequences
3. How to select preventive maintenance tasks and intervals
4. How to select predictive maintenance tasks and intervals
5. How to select failure finding tasks and intervals
6. What other function protective actions are available
7. When run-to-failure is appropriate
8. How to packaging and implement RCM analysis results
9. Commercial RCM standards
10. Various approaches to RCM
11. RCM terminology
12. Identifying and allocating resources for a RCM program
13. Techniques for prioritizing systems for analysis
14. Use of Weibull and statistical analysis in RCM processes
15. Packaging and implementing RCM analysis results

TRAINING MATERIAL OUTLINE :
A. Theory

1. Introduction to Reliability Centered Maintenance (RCM) concepts
2. RCM analysis preparation
3. Techniques for prioritizing systems for analysis
4. Failure Modes and Effect Consequence Analysis for RCM
5. Evaluating failure consequences
6. Statistics in RCM
7. Statistical principles used in RCM
8. Use of Weibull analysis in RCM processes
9. Selecting the right maintenance tasks for reliability
10. How to select preventive maintenance (PM) tasks and intervals
11. How to select predictive maintenance (PdM) tasks and intervals
12. How to select failure finding tasks and intervals
13. Other functional maintenance strategies
14. When Run-to-Failure is appropriate
15. implementing RCM results

B. Workshops (practice)

1. Applied RCM in station gas compressor
2. Gas turbine-compressor system
3. Gas treatment plant ( gas dehydration system, H2S removal)participants should prepare their laptop, P&ID, Process flow

C. Interactive Discussion

Registrasi Tidak Mengikat

1. Nama/Your Name(required)
2. Email(valid email required)
3. Nama Perusahaan(required)
4. Jabatan(required)
5. Telp Kantor(required)
6. Fax
7. No HP(required)
8. Pesan
9. Jumlah peserta yang ikut
10. Jenis pembayaran (transfer atau cash)
11. Kirim salinan formulir ini ke saya

 

cforms contact form by delicious:days

Di akses dari kata kunci : gas turbine reliability centered maintenance, makalah human reliability analysis, rcm 2 seminars, reliability centered switchgear maintenance

Event lainnya :

1. Reliability Centered Maintenance Reliability Centered Maintenance (RCM) Tanggal : 02-03 Januari 2012 23-24...
2. MODERN MAINTENANCE MANAGEMENT MODERN MAINTENANCE MANAGEMENT Tanggal 28-30 November 2011 Tempat Pelaksanaan Puri...
3. ROOT CAUSE FAILURE ANALYSIS ROOT CAUSE FAILURE ANALYSIS Tanggal 16-18 November 2011 Jam Pelaksanaan...
4. MAINTENANCE OF BUILDING MAINTENANCE OF BUILDING Tanggal 25 – 27 Oktober 2011 Waktu...
5. PREVENTIVE AND PREDICTIVE MAINTENANCE PREVENTIVE AND PREDICTIVE MAINTENANCE Tanggal 05-08 September 2011 Waktu Pelaksanaan...
6. REABILITY CENTERED MAINTENANCE REABILITY CENTERED MAINTENANCE Tanggal : 18-19 Oktober 2011 (Yogyakarta) 29-30...
7. Culture Change For Maintenance And Reliability Improvement Culture Change For Maintenance And Reliability Improvement Tanggal 26-28 Maret...
8. ROOT CAUSE ANALYSIS ROOT CAUSE ANALYSIS Hotel Puri Artha, Yogyakarta |29-31 Maret 2011...
9. ROOT CAUSE ANALYSIS ROOT CAUSE ANALYSIS Hotel Puri Artha, Yogyakarta |22-24 Maret 2011...
10. Developing Effective Maintenance with Reliability-centered Maintenance (RCM) Developing Effective Maintenance with Reliability-centered Maintenance (RCM) Venue : Hotel...

TAG
Applying the RCM Process, Failure Consequences, Failure Modes and Effects Analysis, Functions and Functional Failures, RCM, Reliability Centered Maintenance


Navigasi Jadwal
Diposting tgl : August 9th, 2010 | Sudah dibaca 1440 kali.

This entry was posted on Monday, August 9th, 2010 at 13:45 and is filed under Bandung, Maintenance. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.